Maximus P2 Flash File Frp Dead Recovery Fix Customer Care File ((BETTER))

```

How to Install Maximus P2 Flash File Frp Dead Recovery Fix Customer Care File

If you are looking for a way to flash the Maximus P2 smartphone and fix various issues such as frp lock, dead boot, logo stuck, or lcd problem, then you are in the right place. In this article, we will show you how to download and install the Maximus P2 flash file frp dead recovery fix customer care file using the SP Flash Tool.

The Maximus P2 is a budget-friendly smartphone that runs on Android 8.1 Oreo and has a Mediatek MT6739 chipset. It has a 5.45-inch display, 1GB of RAM, 8GB of internal storage, an 8MP rear camera, and a 5MP front camera. It also supports dual SIM cards and 4G connectivity.

However, like any other smartphone, the Maximus P2 may encounter some software issues that can affect its performance and functionality. For example, you may forget your Google account password and get stuck in the frp lock screen. Or you may experience a boot loop issue where your phone keeps restarting or gets stuck on the logo screen. Or you may have a corrupted or damaged firmware that causes your phone to be dead or have a black or white lcd.

In such cases, you need to flash the Maximus P2 with a new firmware file that can solve these problems and restore your phone to its original state. Flashing is the process of installing a new software on your phone's memory. It can also help you to upgrade or downgrade your phone's software version.

But before you flash your phone, you need to have some requirements and follow some steps carefully. Here are the things you need to do:

Requirements to Flash Maximus P2

A Windows PC or laptop.

A USB cable to connect your phone to your PC.

A backup of your personal data such as contacts, photos, videos, etc. Flashing will erase all your data from your phone.

A fully charged battery or at least 50% of battery power.

The Maximus P2 flash file frp dead recovery fix customer care file. You can download it from here. This file is tested and verified by the Maximus customer care team.

The SP Flash Tool. You can download it from here. This tool is used to flash Mediatek devices.

The Mediatek USB VCOM drivers. You can download them from here. These drivers are needed to recognize your phone by your PC.

How to Flash Maximus P2

Extract the downloaded files to a folder on your PC.

Install the Mediatek USB VCOM drivers on your PC.

Run the SP Flash Tool as administrator.

Click on the Download tab and then click on the Choose button next to the Scatter-loading File option.

Browse and select the scatter.txt file from the extracted firmware folder.

Make sure all the boxes are checked and then click on the Download button at the bottom.

Turn off your phone and remove the battery if possible.

Connect your phone to your PC via USB cable while holding the Volume Down or Volume Up button.

The flashing process will start automatically and you will see a progress bar at the bottom of the SP Flash Tool window.

Wait until you see a green tick mark and a Download OK message at the end of the flashing process.

Disconnect your phone from your PC and insert the battery if removed.

Turn on your phone and enjoy the new firmware.

Congratulations! You have successfully flashed your Maximus P2 with the flash file frp dead recovery fix customer care file. You can now set up your phone and use it normally. If you have any questions or problems, feel free to leave a comment below aa16f39245